If you own a Maytag Front Load Washer Model MHW5500FW0 and your washer is reporting the error code FSE1, you need to replace your Door Latch Assembly. The replacement part no. is WPW10443885. The following instructions will walk you through the necessary steps.
For this repair, you will need a small flat blade screwdriver, a T20 Torx driver, a rubber ended clamp, and a pair of needle-nose pliers. The clamp referred to is the type used in carpentry and other tasks; it is like a large clothespin with rubber tips that come together. A headlamp and a pair of forceps could also be helpful. And as with any repair, pay close attention to the placement of parts and steps for removing the malfunctioning part, as you will need to put everything back in place for the appliance to operate.
1. Always start any appliance repair by unplugging the unit from the wall outlet. And don’t forget to turn off the water source to the washer.
2. Open the door to the washer.
3. Detach the bellows spring clamp and the bellows. Pay close attention to the grooves that the bellows and spring clamp will be reassembled in
4. Remove the T20 screws at the top and bottom of the door latch. These screws hold the assembly in place.5. Disconnect and remove the door latch assembly
1. Install the new Door Latch Assembly
2. Replace bellows and spring
3. Once the spring is back in place, the unit is reassembled. Don’t forget to turn the water on and plug it back into the wall outlet.
If you need assistance with this or any other appliance repair, schedule a visit online or call (937) 878-8271. A to Z Appliance Repair serves greater Dayton and Cincinnati, OH area.
Error codes are truly a miracle of modern appliances! They pinpoint the area of your…
Whirlpool Duet washers are front-loading appliances known for their energy efficiency and high performance. But…
Usually, when one part of an appliance isn’t working, the whole thing is impacted. That’s…
There are hundreds of potential error codes that can be displayed on Speed Queen washers.…
Whether your KitchenAid ice maker is making a little bit of ice or no ice…
It’s always frustrating when there’s an issue with your oven, and all you want to…