"SP W11540964 installed heating element from, pre-screened parts ran and tested unit unit checks good at this time ; dspstn on spec-tagged invntry: 1 W11537778 HEATER"

Power cord does not have continuity or power thru it. Please order part for customer. ; ordrng 1 W11238433 (Harness power cord)

Ice maker received does not plug into unit. Did notice that ice maker in refrigerator was turned off. Showed customer how ice in bin can turn off ice maker. Customer will monitor ice maker operation. Freezer temperature is good.

Ice maker received does not plug into unit. Did notice that ice maker in refrigerator was turned off. Showed customer how ice in bin can turn off ice maker. Customer will monitor ice maker operation. Freezer temperature is good.

Issue --- will not power on. A few lights stay on the UI all the time. F6E3 ( ACU cannot hear UI ) F0E3 ( overload ) F0E5 ( off balance ) F9E2 ( pump drive system ) F6E2 ( UI cannot hear ACU ). Pulled UI console to clean board with alcohol & seal with nail polish. Reinstalled UI console & powered up unit & ranTest cycle to observe --- checks OK.