Pulled out combo unit put on cart. Replaced magnetron and tested operation was good. Reassembled and out back into cavity. Tested again had proper operation.

Had loose connection at junction box. Used wire tie to secure harness connection tested several times operation checks ok. ; used 1 W11390781 ( Wire tie) from stock

Aaron 7739184535. Pulled unit out replaced inverter and acu. Returned power and tested. Had same error code. Called tech support did testing have power going to inverter magnetron not working. Per tech support issue is either magnetron or harness. Spoke with customer on phone was given permission to order additional part. Magnetron W11346197 229.41; ordrng 1 W11346197 (Magnetron)

Chris 7739182763Front panel is scratched. Called tech support about water leaking when using steam function. Water leaks thru door when this option is used. Per tech support checked nozzle when using steam and do get a mist pattern which is correct. Tech support says door is not designed to be water tight so water can pass thru door seal when using steam on smaller loads. Was told to advise customer to add towels in with smaller loads using steam. ; ordrng 1 W10806345 (Front panel) and 1 WPW10612925 (Badge)

Microwave portion has F1E5 error. Followed tech sheet pulled unit out verified all connections and retested error still persists per tech sheet need acu and inverter. Please order parts for customer. Control 179.52 WPW10486188 inverter 237.31 W10217711 ; ordrng 1 WPW10486188 (Acu) and 1 W10217711 (Inverter)