"Replaced gearcase and drive hub and tested unit and calibrated the gearcase, unit was making a rubbing noise due to a loose belt and bad cam, replaced cam and belt and tested unit again, unit checks ok.; used 1 W10721967 (Cam), and 1 W11239857 (Belt) from stock"

"Customer stated unit is making a dragging noise and is not spinning clothes out. Tested unit in diagnostics and found when in spin, unit is only spinning the washplate due to a stripped gearcase and drive hub. Both needs replaced.; ordrng 1 W10528947 (Hub) and 1 W11454734 (Gearcase)"

"Error code for F4-E3 restricted airflow. Took temp readings on unit to confirm proper temp highs and lows. Unit is maxing put at 150, element is working well. Unit vents out of roof but I have no way to getting onto roof to check vent, sensor counted down normally with no clothes in it, recommending cycle to be run with out vent hooked up for one cycle to confirm proper drying and venting out of unit. Cus to have upper vent checked for restriction out of roof for potential issue."

"Cut out leaking Factory Connection and soldered in copper tubing, recharge units, all checks okay at this time"

"Main control-11033702-$195.00 labor-$123.00. Control is on an indefinite backorder, not available at any of our authorized distributors, if customer would like to check on availability or search for the part themself online we would be able to install part for them, upon diagnosing unit found that defrost cycle is working at this time, defrost heater coming on, evaporator fans are running and vents are clear at this time, ice maker is making ice slowly,, temperatures in the freezer at 7?, temperatures in the refrigerator at 37. customer stated that the mullion heater was getting very hot during a period of time that the fridge was not cooling, but after resetting the plug on the unit unit started cooling again, diagnosed possible issue with main control board, but part is not available at this time"