"Found F9E1, and F8E3 errors, checked drain pump, checked pressure switch, pressure switch and hose, found switch is reading tub full when empty, found service pointer W11786877B for errors, per service pointer replaced control, calibrated control, unit is functioning properly, use s code S313AC for parts, and labor, checks ok."

"Found F3E1 error, found switch is reading water in tub when empty, found service pointer W11766193 for error, per service pointer replaced control, calibrated control, unit is functioning properly, use s code S153EB for parts, and labor, checks ok."

"Found F3E1 error, found pressure switch reading water in tub when empty, replaced control, unit is functioning properly, checks ok."

"Found no stored error codes tested unit, found front right foot is not level causing unit to go off balance, found oversetting in unit causing unit to not finish spin cycle, calibrated control, informed customer of proper amount of detergent to use per load, informed customer to clean unit with 1/4 cup of vegetable oil, and then a cleaner right after, unit is functioning properly at this time, checks okay."

"Found F8E1 long fill error, checked water valve, found no cold water to unit, found cold water was turned off causing error, turned on cold water, calibrated control, tested unit, unit is getting hot, and cold water, checks ok."