"Permtesting found that the suspension checked ok. Found that the unitnwas slightly off level and corrected it. Ran a test load on a rinse and spin and checked all functions and components, all operation check ok. Instructed customer on proper loading and cycle settings. Ahs wrn; dspstn on spec-tagged invntry: 1 W11396716 SUSPENSION RODS"

"Inspected unit, checked control for error codes, recalibrated unit, checked hot and cold water valves, checked shifter and agitate and spin, ran through auto test cycle, all operation checks normal"

"Per the previous visit, replaced the upper rack wheels on the right side of the of the unit. Checked operation, checks ok."

Wheel part was not in bin and has to be reordered. ; schdld next appmnt for 7/21 FRI !

"Per testing according to f5e3 and f5e2 (lock errorsl installed new lid latch assembly also cleaned corrosion off of the connections on the UI Board and sealed with acrylic sealant. Calibrated the unit and checked for proper operation in both a diagnostics cycle and a test cycle, operation checks ok. AHS WRN ; dspstn on spec-tagged invntry: 1 W10810403 LATCH"