Pulled out oven and placed on cart. Removed back panel and replaced thermostat and replaced fuse. Reassembled and tested with customer operation checks ok. Let unit pre heat to 350. Had no issues.

UNIT DOES NOT POWER ON PULLED OUTMOVEN AND PUT ON CART REMOVED BACK COVER AND POWER CORD AS CORD WAS NOT LONG ENOUGH TO PULL OUT ALL ENOUGH TO DIAGNOSE. REMOVED BACK COVER FOUND OPEN THERMOSTAT. RESET THERMOSTAT AND HOOKED UNIT BACK UP. TURNED POWER BACK ON HAD NO LIGHTS OR DISPLAY. ALSO FOUND BAD THERMAL FUSE. GAVE CUSTOMER QUOTE FOR NEW THERMAL FUSE AND T.O.D. THERMOSTAT ON BACK OF UNIT. CUSTOMER APPROVED REPAIR. PLEASE ORDER PARTS FOR CUSTOMER ; ordrng 1 W11034459 (Thermostat fix) and 1 W11025102 (Thermal fuse)

"Removed power and water from dishwasher. Removed all,parts from tub. Replaced tub and put all parts back on. Tested in diagnostics operation checks good for customer."

Tub has leak bottom is caved in. Tub needs replaced. Please order part for customer ; ordrng 1 W11409866 (Tub)

"Installed new blower wheel, tested unit, all checks okay ; dspstn on spec-tagged invntry: 1 WP697772 BLOWER WHEEL"