"Found that office didnt send DSI board back out with me, called Wayne, ran to V&V and picked up a DSI board for unit, Installed new main gas valve and DSI board, tested unit by preheating oven to 400?F, observed unit light, run, re-light and preheat to 400?F, unit is now operating as designed, all checks OK at this time.; pckd up 1 WPW10331686 (DSI board)"

Tech was assigned as a helper;

"Inspected unit, found that bake flame tube would ignite but once flame tube got hot, flame tube would no longer lgnite, called tech line, tech line told me to run checks outlined in service pointer W10622771A, ran checks twice, checked polarity and power from outlet, checked dsi board mounting bracket, ensured ground bracket wasnt making contact with dsi board terminals as outlined in pointer, ensured all connections were secure, ensured grounding screw for flame tube and igniter were clean and tight, ensured igniter harness had no damage and connections to igniter and dsi board were secure, ensured igniter had correct spacing from flame tube along with electrode, could not find any issues with related components, called terry, rescheduled call with harness for igniter and another dsi board, terry to run call with me on follow up appointment.SR7737200675; ordrng 1 WPW10701462 (Harness) and 1 WPW10331686 (Spark module)"

"Installed new spark module, tested unit, bake flame tube is now igniting and staying lit, unit is operating as designed, all checks okay at this time."

"Installed new spark igniter, found unit still having previous symptoms, called tech line and terry, tech line had me ohm out gas valve and test spark voltage to bake igniter, found igniter only receiving 5v during spark, when the minimum voltage required is 8v, determined unit has bad spark module, ordered part, rescheduled accordingly SR7737200675ED ; ordrng 1 WPW10331686 (Spark module)"