"Found drain motor impeller broken off causing no drain, replaced motor and tested unit, checks ok."

"Found unit throwing F6E2 and F6E3 errors but working for a few cycles after reset. Determined user interface is partially corroded causing issue, cleaned and grease and advised customer it should work indefinitely but could still glitch from time to time. Quoted UI replacement and customer declined, unit currently checks ok. Console W11135391 $282.91 Labor $98.75 Shipping $10.00"

"Found unit shaking badly in spin and shutting off cycle. Tested and found rear right foot very high causing unlevel balance issues. Leveled foot and tested spin under load, spinning out fine, advised customer on load sizing as well, checks ok."

"Customer stated unit stopped making ice but began producing again today, confirmed bin full on arrival. No icemaker error codes, all fans operating and both compartments cooling fine, icemaker harvests and fills properly. Cleaned fair amount of dog hair off of condenser coils and advised customer to try and do that regularly, could not find any other issues and advised customer to monitor for now, checks ok."

"Found unit unresponsive due to corrosion on user interface. Cleared and cleaned with grease and unit now operating properly, advised customer it could work indefinitely but if needed new UI W11112656 is $356.35 + labor, unit checks ok."