"W10371918 door freezer and harness. NLAUnit has clogged valve, water was turned off and had calcium build up in dispenser. Cleaned out. Defrosted fill tube Flushed unit with new filter. Customer to observe all checks are testing good at this time"

"Found unit off and completely unresponsive, happened near beginning of cycle. Hard reset control and unit came on, had F1E2 voltage issue. Tested all components, unit operating properly. Customer has water softener plugged in same breaker as washer, advised his voltage draw may have caused issue and softener needs relocated to new outlet. Unit testing properly at this time, checks ok."

"File-7737365733Inspected unit, took high and low side pressures, high side only getting to about 80 psi, low side was in a 15 lb vacuum, unit equalized at 20 lb., called tech line to document leak, checked all connections in the rear of units, checked fresh food and freezer evaporator, pressurized units, no sign of dye or bubbles leaking, confirmed with tech line and internal leak that is not repairable, tech line is pushing unit through to product review, Whirlpool will contact customer in 3 to 5 business days"

WB26T10063 blower - 189.82WB27T11380 control ui - 982.04 Labor - 153.00Removal - 75.00Servcie call - 119.00Unit has cooling fan issue and user interface would need replaced due to short. Due to part cost cus deciding to not repair.

"Replace compressor, die dryer and process stub, recharge unit, unit is getting good Frost pattern, all checks okay; used 1 W11506635 (Stub) from stock"