Appliance Repair Arcadia Ohio

Removed and replaced electronic control. Ran. Through calibration mode and then test mode had no issues. Ran a normal cycle and the display flashed and the lid would not lock. Removed and replaced the latch assembly. Ranvthorugh test mode again with no issues and then started a normal cycle and it worked properly. Unit operation checks OK showed customer ; used 1 W11307244 ( Latch) from stock

Put unit in diagnostics no error codes. Ran unit im high speed spin and heavy agitate with no issue. Called techline spoke with Joel 7731368855 said to start with belt and splutch kit. Installed belt and splutch calibrated washer and ran through test mode had no issues. Unit operation checks OK showed customer ; dspstn on spec-tagged invntry: 1 W10721967 CAM and 1 W11239857 BELT

"washer has loud squeak during spin cycle. Put in diagnostics had no error codes. Ran through test mode had no issues. Per service pointer I checked the transmission, splutch, and shifter, all checked OK. Put unit in Manuel test high spin unit did not have any noise. Per service pointer the ACU needs replaced. Please order part for customer.; ordrng 1 W11498190 (ACU)"