Gave unit pleanty of time to duplicate noise and it did not verified all components are working andnunit is at proper temperature. Customer will monitor operation.

KITCHEN WHIRLPOOL WDTA50SAHW0 Found that tub gasket was coming apart from tub and is needing replaced; ordrng 1 W10300924 (Seal tub)

WASHER MAYTAG MVWB835DW Removed old controller and installed new controller ran calibration and ran self test and worked properly

KITCHEN WHIRLPOOL WDTA50SAHW0 Found that the right side of the tub Shield would come out of the channel that held it in place so put seal back in the channel and crimp Channel down to hold seal in place if this happens again we'll need to order a new seal part number

WASHER MAYTAG MVWB835DW Ran Diagnostics and it had error code f0e5 and f0e3 and f3e2 and f5e3 so I ran a calibration and self test and itpassed so had customer put a load in the washer and it ran normal so need new controller ; ordrng 1 W11400681 (Controller)