"Checked for error codes, no stored error codes, tested unit, found wash motor coming on, but not strong enough to push water through spray arms, replaced Sump&motor, calibrated unit, ran test cycle, unit is functioning properly, checks ok."

"Found back right burner not igniting, checked igniter, checked incoming gas, adjusted igniter, and burner head, tested all burners, all burners are igniting, and heating normally, checks ok."

"Checked incoming voltages, unit is getting 240 volts, checked heating element, checked screen on bulkhead, checked for excess lint in unit, unit is heating normally, checks ok."

"Replaced ACU, problem persisted, spoke to TS, ordering wiring harness; ordrng 1 W11469478 (Main harness)"

"Installed control assembly, which did not include ACU board, did not correct issue. Damaged original control assembly during removal leaving replacement installed. Ordering new control assembly and ACU board.; ordrng 1 W11252185 (Control assembly) and 1 W11552018 (ACU board)"