"Customer stated unit would not run, customer had other repair company out and company checked on the motor of unit and now unit is running properly per customer. Tested unit and found dunit is spinning, venting, and heating properly. Advised customer to monitor unit, unit checks ok. If customer calls back in for starting issue, unit needs new motor.Motor 279827"

"Checked incoming gas line, check connections at regulator, found both connections to cooktop, and oven at regulator are very loose causing leak, tighten down connections at regulator, no leaks found at this time, could not test unit due to propane tank being locked out, customer to have propane tank reinstalled, and test unit, customer to observe, checks okay at this time."

W11419171$304.04 HMI labor $123.00 check the machine over unit was locked you I would not respond checked for voltage at the UI connection on the main control has zero volts DC coming out of the UI going to the HMI unit needs that minimum the main control replace customer declined estimate for repair of 58204; dspstn on spec-tagged invntry: 1 W11394572 LATCH

Both valves at the back of the fridge raider with cracked and broken replaced both valves and leak checked after repair. All other tests are good customer to observe

Unit has short on Main electronic control that was preventing the government and broil element from operating. Pulled unit out and replaced control board. After a pair of checks and tests are good. Customer to observe