Appliance Repair Napoleon Ohio
AtoZ Appliance Service Rated out of 5 stars based on 0 customer reviews
We serviced a
MAYTAG WASHER
Model MVWC465HW3
Near Napoleon, OH 43545
Austin
Job Details:
07/14/2022
Customer was not sure on how to use the washer no one showed them how to use it no error codes calibrated unit unit ran fine three different times unit checks good at this time
We serviced a
MAYTAG WASHER
Model MVWC565FW2
Near Napoleon, OH 43545
Pete H.
Job Details:
02/01/2022
Washer needed the updated actuator removed and replaced actuator recalibration and self test everything works properly; used 1 W10913953 (Actuator) from stock
We serviced a
WHIRLPOOL RANGE
Model WEG750H0HZ0
Near Napoleon, OH 43545
Mason
Job Details:
12/29/2021
Put unit in diagnostics had f6e0 error followed tech sheet will need to replace oven hmi. Flame is also not speading properly on center burner head which will need replaced please order parts for customer ; ordrng 1 W11245289 (Burner head rf and center) and 1 W11339755 (Console) and 1 W11084034 (Ignitor rf)
We serviced a
WHIRLPOOL DRYER
Model WED6620HW1
Near Napoleon, OH 43545
Mason
Job Details:
12/29/2021
Heating element had loose bolt that was rattling. Tightened bolt. Unit operation checks ok showed customer
We serviced a
WHIRLPOOL WASHER
Model WTW5105HC0
Near Napoleon, OH 43545
Jonathan
Job Details:
12/23/2021
"Washer has no error codes and went thru diagnostics with no issues. Leaned washer back against wall and removed belt cover. Found belt very loose. Installed new belt and cam reassembled washer and did test cycle again. Operation checks ok. ; used 1 W11239857 ( Belt), and 1 W10721967 ( Cam) from stock"