"Replaced dispenser assembly and tested unit, found no leaks, unit checks ok."

"Customer stated unit leaks during cycle. Tested unit and found unit has a Crack innthe dispenser under the valve causing water to leak while filling, dispenser assembly needs replaced.; ordrng 1 W11400157 (Dispenser)"

"Complaint of off balance, noise. Found feet not level, leveled feet, checked under unit, clean, tested unit lid lock, fill, and drain normal, agitate normal, found suspension springs are weak. Replaced suspension, recalibrated control, all checks ok."

"Complaint of lid damaged at corner, and noise during cycles. Found feet off balance, corrected feet. Confirmed lid issue, checked errors, none stored, ran through diagnostic test, fill normal, agitate normal, drain normal, spin normal. Replaced lid, all functions normal at this time.; pckd up 1 W11117421 (Lid)"

Found a washer would not go into sensing it just kept blinking and wash showed customer how to cancel out the wash cycle once I canceled it everything started up and started working put it into a clean washer setting let it get past sensing everything checks fine at this time