"Inspected unit, found heating element burnt out, also found that vent has a blockage that is not letting air flow through the vent, no blockage found at the back of dryer or in vent attached to the wall, advise customer there may be a blockage up inside the wall or coming out of the roof, replaced heating element for customer and verified unit is heating properly, customer to have vent cleaned out"

"Inspected unit, found obstruction blocking cold water valve in screen, cleaned out screens and verified good water flow coming through hoses, unit is filling good after repair, giving customer quote for valve in case they decide they want it to replace it. valve assembly DC97-07125Z-$168.18 labor-$123.00 + tax and shipping"

"Inspected unit, checked hot and cold water valves, checked shifter, checked unit and agitate and spin, no error codes in Diagnostics, unit is balanced properly on the floor, found no issues in operation, found drain and fill hoses hitting the back of the washer causing noise during operation, advise customer that unit is operating as designed"

"Found cracked water line in front of unit, was able to route additional water line from the water reservoir inside the refrigerator through Channel and reconnect to the front connector, verified no leaks and unit is operating properly after repair"

Leaking NO evidence of water from inside cabinet that I can see. Ran a Quick Cycle to observe unit filled about 2/3 of Basket. Found leak from right / Front. Ran quick cycle second time Unit by itself cancelled. Disconnected the recirculating pump & ran a quick cycle again to see if leakWould occur - unit drained again with H2O supply coming up on display & unit drains. Unit will Need . Inlet water valve WH13X26637 ( $ 52.28) / UI MC Board WH22X35757 ( $ 220.54 ) /Labor $ 175.00. Customer will replace Washer.